Sinais clínicos do transtorno do espectro autista (TEA) para auxiliar o odontopediatra no diagnóstico precoce / Clinical signs of Autistic Spectrum Disorder (ASD) to assist pediatric dentists in early diagnosis

Introdução: O Transtorno do Espectro Autista (TEA) é um distúrbio de desenvolvimento que interfere nas áreas de interação social e comportamental, podendo ser classificado em níveis leve, moderado e severo. Objetivo: Realizar uma revisão de literatura para identificar os sinais presentes em pacientes com esse transtorno, e assim auxiliar os cirurgiões dentistas, principalmente o odontopediatra, no diagnóstico precoce. Revisão de literatura: As primeiras manifestações do TEA aparecem antes dos 36 meses de idade. Um dos sinais clínicos relacionados à interação social são crianças que preferem ficar sozinhas, não participando de brincadeiras. Costumam ser observados sinais de comportamentos repetitivos e interesses restritos, que podem dificultar o convívio social. Atrasos na fala são, frequentemente, o principal sinal observado pelos pais. Alguns questionários de rastreamento de TEA podem ser aplicados pelos profissionais da saúde. Discussão: O cirurgião-dentista, especialmente o odontopediatra, deve estar atento ao desenvolvimento do paciente infantil, verificando a presença de atraso na fala, característica importante do espectro, bem como de desvios de comportamento incompatíveis com a idade ou procedimento odontológico. Na presença de algum sinal do espectro o profissional não deve hesitar em encaminhar para outros profissionais para melhor avaliação. Conclusão: O conhecimento desses sinais por parte dos profissionais de saúde, em especial o odontopediatra, é de fundamental importância para auxiliar no diagnóstico precoce, a fim de minimizar os sintomas e contribuir para o desenvolvimento e integração da criança com TEA na sociedade.

Introduction: Autism Spectrum Disorder (ASD) is a de-velopmental disorder that interferes in the behavioral and social interaction areas, and can be classified into mild, moderate, and severe levels. Aim: To conduct a literature review to identify the signs present in patients with ASD, and thus assist dentists, especially pediatric dentists, in early diagnosis. Literature review: The first manifestations of ASD appear before 36 months of age. One of the clinical signs related to social interaction are children who prefer to be alone, not participating in games. Signs of repetitive behaviors and restricted interests are usually observed, which can hinder social interaction. Speech delays are often the main sign observed by parents. Some ASD screening questionnaires can be applied by healthcare professionals. Discussion:The dentist, especially the pediatric dentist, must be attentive to the development of the patient, verifying the presence of speech delay, an important characteristic of the spectrum, as well as behavioral deviations incom-patible with age or dental procedure. In the presence of some signs of the spectrum, the professional should not hesitate to refer the patient to other professionals for further evaluation. Conclusion: Knowledge of these signs by health professionals, especially pediatric dentists, is of fundamental importance to assist in early diagnosis in order to minimize symptoms and contribute to the development and integration of children with ASD in society.

Validity and reliability of a trigonometry-based method for the measurement of tooth movement on digital models.

OBJECTIVE: The objectives of the present study were to develop a method for longitudinally measuring tooth rotation, inclination and angulation on digital models, and to test the method validity and reliability. METHODS: The initial and final planned models of 14 patients treated with Invisalign® (386 teeth) were exported from ClinCheck®. The rotation, inclination and angulation values were assessed for the incisors, canines, premolars and molars, in both models, using trigonometry. An application was developed in Python 2.7 to automate the measurements. The ∆planned (variation in the position between the initial and final planned models) was obtained for each tooth and each type of movement. To test the validity, the degree of agreement between the ∆planned and the values available in the Invisalign® Table of Movements was assessed using the Intraclass Correlation Coefficient (ICC) and Bland-Altman analysis. For intra and inter-rater reliabilities, the ∆planned was obtained again. RESULTS: Excellent ICCs (> 0.9) and limits of agreement with narrow and clinically acceptable discrepancies were obtained for the rotation of all teeth (except maxillary canines, which had broader limits: -3.47 - 5.43) and for the inclination of premolars and molars. The inclination of anterior teeth and angulation of all teeth had ICCs and limits that were not indicative of great agreement. The reliability was high for the three movements (discrepancy <2°). CONCLUSIONS: The method developed is reliable and suitable for longitudinally measuring inclination (posterior teeth) and rotation (except maxillary canines). It has limited value for the other movements measurements.

Validity and reliability of a trigonometry-based method for the measurement of tooth movement on digital models

ABSTRACT Objective: The objectives of the present study were to develop a method for longitudinally measuring tooth rotation, inclination and angulation on digital models, and to test the method validity and reliability. Methods: The initial and final planned models of 14 patients treated with Invisalign® (386 teeth) were exported from ClinCheck®. The rotation, inclination and angulation values were assessed for the incisors, canines, premolars and molars, in both models, using trigonometry. An application was developed in Python 2.7 to automate the measurements. The ∆planned (variation in the position between the initial and final planned models) was obtained for each tooth and each type of movement. To test the validity, the degree of agreement between the ∆planned and the values available in the Invisalign® Table of Movements was assessed using the Intraclass Correlation Coefficient (ICC) and Bland-Altman analysis. For intra and inter-rater reliabilities, the ∆planned was obtained again. Results: Excellent ICCs (> 0.9) and limits of agreement with narrow and clinically acceptable discrepancies were obtained for the rotation of all teeth (except maxillary canines, which had broader limits: -3.47 - 5.43) and for the inclination of premolars and molars. The inclination of anterior teeth and angulation of all teeth had ICCs and limits that were not indicative of great agreement. The reliability was high for the three movements (discrepancy <2°). Conclusions: The method developed is reliable and suitable for longitudinally measuring inclination (posterior teeth) and rotation (except maxillary canines). It has limited value for the other movements measurements.

RESUMO Objetivo: Os objetivos do presente estudo foram desenvolver um método para medir longitudinalmente a rotação, inclinação e angulação dentárias em modelos digitais, e testar sua validade e reprodutibilidade. Material e Métodos: Os modelos inicial e final planejado de 14 pacientes tratados com Invisalign® (386 dentes) foram exportados do ClinCheck®. Os valores de rotação, inclinação e angulação foram calculados para incisivos, caninos, pré-molares e molares, em ambos os modelos, por meio de trigonometria. Um aplicativo desenvolvido em Python 2.7 foi utilizado para automatização das medidas. O ∆planejado (variação na posição entre os modelos inicial e final planejado) foi obtido para os movimentos descritos, nos diferentes grupos de dentes. A validade do método foi verificada pelo grau de concordância entre o ∆planejado e os valores disponíveis na Tabela de Movimentos do Invisalign®, utilizando-se o Coeficiente de Correlação Intraclasse (ICC) e a análise de Bland-Altman. O ∆planejado foi novamente calculado para análise da reprodutibilidade intra e interexaminadores. Resultados: Excelentes ICCs (> 0,9) e limites de concordância com discrepâncias reduzidas e clinicamente aceitáveis foram obtidos para a rotação de todos os dentes (exceto os caninos superiores, que expressaram limites mais amplos: -3,47 - 5,43) e para a inclinação de pré-molares e molares. A inclinação dos dentes anteriores e a angulação de todos os dentes apresentaram ICCs e limites não representativos de boa concordância. A reprodutibilidade foi alta para os três movimentos (discrepância < 2°). Conclusões: O método desenvolvido é reprodutível e se mostrou adequado para mensuração longitudinal da inclinação de dentes posteriores e rotação de todos os dentes, exceto caninos superiores. Apresenta valor limitado para as demais mensurações.

Insertion torque versus mechanical resistance of mini- implants inserted in different cortical thickness

OBJECTIVE: This study aimed to measure insertion torque, tip mechanical resistance to fracture and transmucosal neck of mini-implants (MI) (Conexão Sistemas de PróteseT), as well as to analyze surface morphology. METHODS: Mechanical tests were carried out to measure the insertion torque of MIs in different cortical thicknesses, and tip mechanical resistance to fracture as well as transmucosal neck of MIs. Surface morphology was assessed by scanning electron microscopy (SEM) before and after the mechanical tests. RESULTS: Values of mechanical resistance to fracture (22.14 N.cm and 54.95 N.cm) were higher and statistically different (P < 0.05) from values of insertion torque for 1-mm (7.60 N.cm) and 2-mm (13.27 N.cm) cortical thicknesses. Insertion torque was statistically similar (P > 0.05) to torsional fracture in the tip of MI (22.14 N.cm) when 3 mm cortical thickness (16.11 N.cm) and dense bone (23.95 N.cm) were used. Torsional fracture of the transmucosal neck (54.95 N.cm) was higher and statistically different (P < 0.05) from insertion torsional strength in all tested situations. SEM analysis showed that the MIs had the same smooth surface when received from the manufacturer and after the mechanical tests were performed. Additionally, no significant marks resulting from the manufacturing process were observed. CONCLUSION: All mini-implants tested presented adequate surface morphology. The resistance of mini-implants to fracture safely allows placement in 1 and 2-mm cortical thickness. However, in 3-mm cortical thickness and dense bones, pre-drilling with a bur is recommended before insertion. .

OBJETIVOS: os objetivos foram determinar os torques de inserção, a resistência mecânica à fratura da ponta e do perfil transmucoso de mini-implantes (MI) de uma marca comercial (Conexão Sistemas de Prótese), e analisar sua morfologia de superfície. MÉTODOS: foram realizados testes mecânicos para medir o torque de inserção dos MI em corticais de diferentes espessuras, também foi avaliada a resistência à fratura da ponta e do perfil transmucoso. Antes e após os ensaios mecânicos, foi avaliada a superfície dos MI no microscópio eletrônico de varredura (MEV). RESULTADOS: os valores de resistência à fratura dos MI (22,14N.cm2 e 54,95N.cm2) foram maiores e estatisticamente diferentes (p < 0,05) dos torques de inserção nas corticais de 1mm (7,60N.cm2) e de 2mm (13,27N.cm2). Entretanto, o valor do torque de inserção na cortical de 3mm (16,11N.cm2) e no osso denso (23,95N.cm2) foi estatisticamente semelhante (p > 0,05) ao torque de fratura da ponta do MI (22,14N.cm2). O torque de fratura do perfil transmucoso (54,95N.cm2) foi maior e estatisticamente diferente (p < 0,05) dos torques de inserção em qualquer uma das situações testadas. A análise em MEV mostrou que os MI, como recebidos e após os testes mecânicos, possuem superfícies lisas e sem marcas significativas oriundas do processo de fabricação. CONCLUSÃO: os MI avaliados apresentaram adequada morfologia da superfície. A resistência do MI foi compatível com a instalação em corticais de 1 e 2mm, porém, em cortical de 3mm e em ossos densos recomenda-se prévia perfuração com broca. .

Diagnosis and management of Bell's palsy.

Bell's palsy (BP) is an idiopathic peripheral facial nerve paralysis of sudden onset. Its most alarming symptom is unilateral facial weakness, which can result in the inability to close the eyelids, smile, or whistle. The pathogenesis of BP is controversial and is believed to be caused by inflammation of the facial nerve at the geniculate ganglion. Many viruses, especially herpes simplex and herpes zoster, have been suggested as initiators of this inflammatory process; however, this has not been proven. This report describes the case of a 14-year-old girl with right hemifacial palsy who sought treatment one month after the onset of palsy. The patient experienced a satisfactory recovery within 30 days of treatment and has maintained a stable physical outcome after 15 months of follow-up. Early treatment based on careful investigation of BP, with particular attention given to the differential diagnosis of BP, can improve the patient's function and esthetics.